Question 1

How do I use these default passwords?

Accepted Answer

To use these default passwords, connect to your modem/router, open a web browser, enter the IP address shown in the table, and use the default username and password to log in to the admin panel.

Question 2

Why can't I access my modem's admin panel?

Accepted Answer

Make sure you're connected to your modem's network. Check that you're using the correct IP address. If the default credentials don't work, the password may have been changed previously. Try resetting your modem to factory settings.

Question 3

Should I change the default password?

Accepted Answer

Yes, absolutely! Default passwords are publicly known and pose a security risk. After logging in with the default credentials, immediately change the password to a strong, unique password to protect your network.

Question 4

What if my modem model is not listed?

Accepted Answer

Try searching for your modem manufacturer's website or user manual. You can also try common combinations like admin/admin, admin/password, or check the label on your modem device for default credentials.

Question 5

How do I reset my modem to factory settings?

Accepted Answer

Most modems have a small reset button (usually recessed). Press and hold it for 10-30 seconds using a paperclip while the modem is powered on. This will restore all settings including the default password. Note: This will erase all custom configurations.

Question 6

What is the most common router password?

Accepted Answer

The most common default router password is 'admin' or 'password'. However, many modern routers use unique passwords printed on the device label for better security.

Question 7

How do I find my router's IP address?

Accepted Answer

On Windows, open Command Prompt and type 'ipconfig'. Look for 'Default Gateway'. On Mac, go to System Preferences > Network > Advanced > TCP/IP. The most common router IPs are 192.168.1.1 and 192.168.0.1.

Question 8

Can I access my router remotely?

Accepted Answer

Most routers support remote access, but it's disabled by default for security. You can enable it in the admin panel under 'Remote Management' or 'Remote Access'. However, this is not recommended unless you use a strong password and VPN.

Question 9

What should I do after changing my router password?

Accepted Answer

After changing your password: 1) Write it down securely, 2) Update WiFi password if needed, 3) Reconnect all devices, 4) Enable WPA3 encryption if available, 5) Disable WPS for better security.

Question 10

How often should I update my router firmware?

Accepted Answer

Check for firmware updates every 3-6 months. Enable automatic updates if your router supports it. Firmware updates fix security vulnerabilities and improve performance. Always backup your settings before updating.

Brand	Model	Username	Password	IP Address	Details
Intelbras	WRN 300	`admin`	`admin`	`10.0.0.1`	Details
Thomson	SpeedTouch 585	`admin`	`admin`	`10.0.0.138`	Details
Technicolor	CGM4140COM	`admin`	`password`	`10.0.0.1`	Details
Technicolor	XB8	`admin`	`password`	`10.0.0.1`	Details
Hitron	CGN3ACR	`admin`	`password`	`10.0.0.1`	Details
Hitron	CGNM 2250	`admin`	`password`	`10.0.0.1`	Details

🔐12,143+ Router Default Passwords (2026)

Find Admin Login Credentials for All Major Brands

Top 10 Brands

Browse by Brand

Popular Searches

Top Router Brands

Common Router IPs

Frequently Asked Questions

About This Database

Security Notice